HPE Aruba Networking AP-635 Wi-Fi 6E Campus Access Point (R7J28A)
[shortdesc]Wi-Fi 6E, tri-radio, 2x2 MIMO, internal antennas, dual 2.5GbE, US model[shortdesc]
[properties]
| Brand | HPE Aruba Networking |
| Model | AP-635 (US) |
| SKU | R7J28A |
| Product Type | Campus Access Point |
| Series | 630 Series Campus Access Points |
| Wireless Standard | Tri-radio 2x2:2 802.11ax Wi-Fi 6E |
| Antenna Type | Internal Antennas |
| Form Factor | Indoor |
| Port Count | Two Ethernet wired network ports |
| Interface | RJ-45, USB 2.0 Type A, DC power interface |
| PoE Support | 802.3at/bt PoE, class 4 or higher |
[/properties]
[specifications]
| Access Point Type | Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz concurrent 802.11ax 2x2 MIMO |
| Maximum Data Rate | 3.9 Gbps aggregate peak |
| 2.4 GHz Radio | Up to 287 Mbps peak data rate |
| 5 GHz Radio | Up to 1.2 Gbps with 2SS HE80 802.11ax client devices |
| 6 GHz Radio | Up to 2.4 Gbps with 2SS HE160 802.11ax client devices |
| MIMO | Downlink multiuser MIMO supported on all radios but disabled by default |
| Client Capacity | Up to 512 associated client devices per radio |
| BSSID Support | Up to 16 BSSIDs per radio (limited to 8 for the 6 GHz radio when using version 8 software) |
| Supported Bands | 2.400 to 2.4835 GHz, 5.150 to 5.895 GHz, 5.925 to 7.125 GHz |
| Radio Technologies | 802.11b DSSS, 802.11a/g/n/ac OFDM, 802.11ax OFDMA |
| High Efficiency Support | HE20/40/80/160 |
| Antenna Gain | 4.6 dBi in 2.4 GHz, 7.0 dBi in 5 GHz, 6.3 dBi in 6 GHz |
| Ethernet Ports | Two RJ-45 ports with 100/1000/2500BASE-T auto-sensing link speed |
| Ethernet Standards | NBase-T, 802.3bz, 802.3az Energy Efficient Ethernet |
| Link Aggregation | LACP support between both network ports |
| DC Power Interface | 12 Vdc nominal, +/− 5%, 2.1 mm/5.5 mm center-positive circular plug |
| USB Interface | USB 2.0 Type A host interface, up to 1A/5W |
| IoT Radio | Bluetooth Low Energy BLE5.0 and Zigbee 802.15.4 radio |
| GNSS Receiver | GNSS L1 receiver supporting GPS, Galileo, GLONASS, and BeiDou signal |
| Security Features | WPA3, Enhanced Open, WPA2-MPSK, built-in Trusted Platform Module |
| Power Sources | Direct DC power and Power over Ethernet on port E0 and/or E1 |
| Maximum Power Consumption | 20.7W/26.4W DC powered, 23.8W/29.4W PoE powered |
| Idle Power Consumption | 8.7W/14.2W DC or 11.7W/17.2W PoE |
| Deep-Sleep Power Consumption | 1.1W DC or 1.9W PoE |
| Operating Humidity | 5% to 95% relative humidity |
[/specifications]
[accesories]
| Included | Mounting bracket preinstalled on the back of the access point |
| Optional Mounting Kit | Mount kits sold separately |
| Optional Power Supply | Power sources sold separately |
[/accesories]
Tri-Radio Wi-Fi 6E for High-Density Campus Networks
The HPE Aruba Networking R7J28A AP-635 is a US internal antenna campus access point designed for enterprise Wi-Fi 6E deployments. It uses three dedicated radios across 2.4 GHz, 5 GHz, and 6 GHz bands to expand wireless capacity, support wider channels, and reduce interference for modern client and IoT environments.
Key Benefits and Features
- Tri-radio 802.11ax design with concurrent 2.4 GHz, 5 GHz, and 6 GHz operation.
- Delivers up to 3.9 Gbps maximum aggregate data rate across supported bands.
- Supports 2x2 MIMO for efficient wireless performance across all three radios.
- Dual HPE Smart Rate Ethernet ports support 100/1000/2500BASE-T connectivity.
- Integrated Bluetooth 5.0 and Zigbee radio supports IoT and location use cases.
Ideal Use Cases
- Enterprise campus WLAN upgrades requiring Wi-Fi 6E capacity.
- High-density offices using video, cloud apps, and many client devices.
- Indoor deployments needing internal antennas and ceiling-oriented coverage.
- Networks requiring dual Ethernet ports for redundancy and added capacity.
Technical Specifications
- SKU: R7J28A
- Model: HPE Aruba Networking AP-635 (US)
- Product Type: Campus access point
- Wi-Fi Standard: 802.11ax Wi-Fi 6E
- Radio Design: Indoor tri-radio, 2.4 GHz, 5 GHz, and 6 GHz concurrent operation
- MIMO: 2x2 MIMO
- Maximum Aggregate Data Rate: 3.9 Gbps
- Antenna Type: Internal antennas
- Ethernet Ports: Two RJ-45 ports with 100/1000/2500BASE-T auto-sensing speed
- Power Support: Direct DC power and PoE on port E0 and/or E1
Deploy HPE Aruba Wi-Fi 6E Capacity with Confidence
Choose the HPE Aruba Networking R7J28A AP-635 for enterprise campus environments that need tri-band wireless capacity, Wi-Fi 6E performance, and flexible wired uplink options in a compact indoor access point.
$292.25
Original: $835.00
-65%HPE Aruba Networking AP-635 Wi-Fi 6E Campus Access Point (R7J28A)—
$835.00
$292.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
[shortdesc]Wi-Fi 6E, tri-radio, 2x2 MIMO, internal antennas, dual 2.5GbE, US model[shortdesc]
[properties]
| Brand | HPE Aruba Networking |
| Model | AP-635 (US) |
| SKU | R7J28A |
| Product Type | Campus Access Point |
| Series | 630 Series Campus Access Points |
| Wireless Standard | Tri-radio 2x2:2 802.11ax Wi-Fi 6E |
| Antenna Type | Internal Antennas |
| Form Factor | Indoor |
| Port Count | Two Ethernet wired network ports |
| Interface | RJ-45, USB 2.0 Type A, DC power interface |
| PoE Support | 802.3at/bt PoE, class 4 or higher |
[/properties]
[specifications]
| Access Point Type | Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz concurrent 802.11ax 2x2 MIMO |
| Maximum Data Rate | 3.9 Gbps aggregate peak |
| 2.4 GHz Radio | Up to 287 Mbps peak data rate |
| 5 GHz Radio | Up to 1.2 Gbps with 2SS HE80 802.11ax client devices |
| 6 GHz Radio | Up to 2.4 Gbps with 2SS HE160 802.11ax client devices |
| MIMO | Downlink multiuser MIMO supported on all radios but disabled by default |
| Client Capacity | Up to 512 associated client devices per radio |
| BSSID Support | Up to 16 BSSIDs per radio (limited to 8 for the 6 GHz radio when using version 8 software) |
| Supported Bands | 2.400 to 2.4835 GHz, 5.150 to 5.895 GHz, 5.925 to 7.125 GHz |
| Radio Technologies | 802.11b DSSS, 802.11a/g/n/ac OFDM, 802.11ax OFDMA |
| High Efficiency Support | HE20/40/80/160 |
| Antenna Gain | 4.6 dBi in 2.4 GHz, 7.0 dBi in 5 GHz, 6.3 dBi in 6 GHz |
| Ethernet Ports | Two RJ-45 ports with 100/1000/2500BASE-T auto-sensing link speed |
| Ethernet Standards | NBase-T, 802.3bz, 802.3az Energy Efficient Ethernet |
| Link Aggregation | LACP support between both network ports |
| DC Power Interface | 12 Vdc nominal, +/− 5%, 2.1 mm/5.5 mm center-positive circular plug |
| USB Interface | USB 2.0 Type A host interface, up to 1A/5W |
| IoT Radio | Bluetooth Low Energy BLE5.0 and Zigbee 802.15.4 radio |
| GNSS Receiver | GNSS L1 receiver supporting GPS, Galileo, GLONASS, and BeiDou signal |
| Security Features | WPA3, Enhanced Open, WPA2-MPSK, built-in Trusted Platform Module |
| Power Sources | Direct DC power and Power over Ethernet on port E0 and/or E1 |
| Maximum Power Consumption | 20.7W/26.4W DC powered, 23.8W/29.4W PoE powered |
| Idle Power Consumption | 8.7W/14.2W DC or 11.7W/17.2W PoE |
| Deep-Sleep Power Consumption | 1.1W DC or 1.9W PoE |
| Operating Humidity | 5% to 95% relative humidity |
[/specifications]
[accesories]
| Included | Mounting bracket preinstalled on the back of the access point |
| Optional Mounting Kit | Mount kits sold separately |
| Optional Power Supply | Power sources sold separately |
[/accesories]
Tri-Radio Wi-Fi 6E for High-Density Campus Networks
The HPE Aruba Networking R7J28A AP-635 is a US internal antenna campus access point designed for enterprise Wi-Fi 6E deployments. It uses three dedicated radios across 2.4 GHz, 5 GHz, and 6 GHz bands to expand wireless capacity, support wider channels, and reduce interference for modern client and IoT environments.
Key Benefits and Features
- Tri-radio 802.11ax design with concurrent 2.4 GHz, 5 GHz, and 6 GHz operation.
- Delivers up to 3.9 Gbps maximum aggregate data rate across supported bands.
- Supports 2x2 MIMO for efficient wireless performance across all three radios.
- Dual HPE Smart Rate Ethernet ports support 100/1000/2500BASE-T connectivity.
- Integrated Bluetooth 5.0 and Zigbee radio supports IoT and location use cases.
Ideal Use Cases
- Enterprise campus WLAN upgrades requiring Wi-Fi 6E capacity.
- High-density offices using video, cloud apps, and many client devices.
- Indoor deployments needing internal antennas and ceiling-oriented coverage.
- Networks requiring dual Ethernet ports for redundancy and added capacity.
Technical Specifications
- SKU: R7J28A
- Model: HPE Aruba Networking AP-635 (US)
- Product Type: Campus access point
- Wi-Fi Standard: 802.11ax Wi-Fi 6E
- Radio Design: Indoor tri-radio, 2.4 GHz, 5 GHz, and 6 GHz concurrent operation
- MIMO: 2x2 MIMO
- Maximum Aggregate Data Rate: 3.9 Gbps
- Antenna Type: Internal antennas
- Ethernet Ports: Two RJ-45 ports with 100/1000/2500BASE-T auto-sensing speed
- Power Support: Direct DC power and PoE on port E0 and/or E1
Deploy HPE Aruba Wi-Fi 6E Capacity with Confidence
Choose the HPE Aruba Networking R7J28A AP-635 for enterprise campus environments that need tri-band wireless capacity, Wi-Fi 6E performance, and flexible wired uplink options in a compact indoor access point.
